由于坦克模型的材料的詳情，它是必不可少的維護，維修坦克模型配件和檢查，對造成的損害，修復損壞的零件，氣動引射器的所有部件都檢查泄漏和特定用例的措施。

Due to the details of the material of the tank model, it is essential to maintain, repair the tank model accessories and inspect, check the leakage and specific use case measures for the damage caused, repair the damaged parts, and all components of the pneumatic ejector.

水貼紙的力學模型是脆弱的很容易干燥，因此模型在很長時間的地方將不得不解除水貼紙包裝食品保鮮膜長時間存儲。把它在冰箱等用于可以取出來。如果破解了水貼紙，你可以使用模型油漆稀釋噴淋水貼紙，反復噴灑不止一次可以被修復。

The mechanical model of water stickers is fragile and easy to dry, so the model will have to be removed from the water stickers for a long time, and the food preservation film will be stored for a long time. Put it in the refrigerator, etc. it can be taken out. If you crack the water sticker, you can use the model paint to dilute and spray the water sticker, which can be repaired by spraying repeatedly more than once.

氣管損壞的更換，在深圳坦克模型跟蹤檢測的幾個重要部分︰介紹了頂端伸出，并面向的零件的作用是確保模型開、閉幕式活動和塑料件頂端伸出，如果力學模型的任何零件損傷和卡活，會導致停止，所以應經常保持模型頂針和潤滑導柱并定期檢查頂針和指南列是否發生變形和表面損傷，一旦發現，要及時更換。

For the replacement of damaged gas tubes, the Shenzhen tank model focuses on tracking and detecting several important parts: the top protruding is introduced, and the role of the parts facing is to ensure that the top protruding of the opening and closing ceremonies of the model and plastic parts. If any parts of the mechanical model are damaged and stuck, it will lead to stop, so the model thimble and lubricating guide column should be kept frequently, and the thimble and guide column should be regularly checked for deformation and surface damage. Once found, Replace it in time.

完成生產周期之后，對力學模型的工作表面，和運動，和面向零件鍍膜覆蓋的的油，特別是應注意上齒輪，與牙條模型軸承部件和彈簧力學模型的拉伸強度的保護，以確保其始終在佳工作狀態。

After the completion of the production cycle, the working surface of the mechanical model, and the movement, and the professional oil facing the coating coverage of the parts, especially the protection of the tensile strength of the upper gear, the bearing components with the tooth bar model and the spring mechanical model, should be paid attention to, so as to ensure that it is always in a good working state.

與生產時間的推移，冷卻道路容易沉積規模和鐵銹和泥和一種藻類，使冷卻流道截面變量小、冷卻通道變窄，大大降低冷卻液和模型志堅的熱匯率，增加企業生產成本，所以對流道的清理應引起注意;為熱路的力學模型，加熱和控制系統的維護，以防止故障的發生，是特別重要。

With the passage of production time, the cooling road is easy to deposit scale and rust, mud and a kind of algae, which makes the section variable of the cooling channel small and the cooling channel narrow, greatly reduces the heat exchange rate of the coolant and model Zhijian, and increases the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the channel; For the mechanical model of thermal circuit, the maintenance of heating and control system to prevent the occurrence of faults is particularly important.

此外大型坦克模型廠家認為保養對于任何一個產品來說，都是非常重要的，我們現在普遍見到的模型其實都是和工業緊密聯系起來的，我們所要用到的工程模型模型制作構件其實都是很重要的。這些模型的特征也是非常好，很多的模型都是非常常用的，在日常的生產中發揮著很大到底作用，我們通過模型來完善整個模型設備產品，這樣一來我們可以去設計一些模型來實現具體的實用效果。

In addition, large tank model manufacturers believe that maintenance is very important for any product. The models we see now are actually closely related to industry, and the engineering model making components we need to use are actually very important. The characteristics of these models are also very good. Many models are very commonly used and play a great role in daily production. We use models to improve the whole model equipment products, so that we can design some models to achieve specific practical results.

以上就是今天為大家介紹的關于問題以及注意事項的全部內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站http://jjdoor.com.cn，我們的工作人員會及時與您取得聯系。

The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://jjdoor.com.cn , our staff will contact you in time.